Grand Cherokee 4WD V8-318 5.2L VIN Y MFI (1994)
Brake Shoe: Service and Repair
Brake Shoe Removal and Installation
Removal
1. Raise and support vehicle.
2. Remove wheel and tire assemblies, then the brake drums.
Exploded View Of 9 Inch Drum Brake Assembly.
Fig. 1 Drum Brake Assembly
3. Remove U-clip and washer from parking brake lever pivot pin and discard clip.
4. Using suitable tool, remove primary and secondary return springs.
5. Remove spring retainers, hold-down springs, and retaining pins.
6. Install suitable clamps over ends of wheel cylinders.
7. Remove adjuster lever, adjuster screw, and spring from brake shoes.
8. Remove brake shoes.
Installation
