Grand Cherokee 4WD V8-4.7L (2003)
1. Add a roap bead of butyl sealer to the sealing surface of the new cover.
2. Position the new cover and install the push pin fasteners.
CAUTION: Do not drill holes or install fasteners along the centerline of the cover.Do not use screws or other sharp fasteners during
installation of the replacement cover.
Fig. 19
3. Drill six 1/8 in holes in the locations indicated. (Fig. 19)
4. Install six 1/8 inch rivets that have a 1/2 inch reach into the six holes.
Quarter Panel Trim
QUARTER TRIM PANEL
REMOVAL
1. Move rear seat to cargo position.
2. If equipped, remove sunshade cover.
3. Open liftgate.
4. Remove upper and lower liftgate opening trim panels.
5. Remove d-pillar upper trim.
6. Remove storage bin (right side only).
