Grand Cherokee 4WD V8-4.7L (2003)
CAUTION: Before installing the radiator or A/C condenser, be sure the radiator-to-body and radiator-to A/C condenser rubber air seals are properly
fastened to their original positions. These are used at the top, bottom and sides of the radiator and A/C condenser. To prevent overheating, these seals
must be installed to their original positions.
1. Equipped with air conditioning: Gently lower the radiator and fan shroud into the vehicle. Guide the two radiator alignment dowels through the
holes in the rubber air seals first and then through the A/C support brackets. Continue to guide the alignment dowels into the rubber grommets
located in lower radiator crossmember. The holes in the L-shaped brackets (located on bottom of A/C condenser) must be positioned between
bottom of rubber air seals and top of rubber grommets.
2. Connect the radiator upper and lower hoses and hose clamps to radiator.
CAUTION: The tangs on the hose clamps must be positioned straight down.
3. Install coolant reserve/overflow tank hose at radiator.