Grand Cherokee 4WD V8-4.7L (2003)
4. Remove the four cylinder block-to-insulator mount bolts and the nut form the engine insulator mount through bolt (Fig. 84) (Fig. 85)
5. Using the jack, raise the engine high enough to remove the engine insulator mount through bolt and the insulator mount.
INSTALLATION
1. Position the insulator mount and install the insulator mount through bolt.
2. Lower the engine until the four cylinder block-to-insulator mount bolts can be installed.
3. Remove the jack and block of wood.
4. Torque the cylinder block-to-insulator mount bolts to 61 Nm (45 ft. lbs.).
5. Install and torque the through bolt retaining nut to 61 Nm (45 ft. lbs.).
