Grand Cherokee 4WD V8-4.7L (2003)
5. Remove the blower wheel retainer clip.
6. Remove the wheel from the blower motor shaft.
INSTALLATION
1. Press the blower wheel hub onto the blower motor shaft. Be sure the flat on the blower motor shaft is indexed to the flat on the inside of the blower
wheel hub.
2. Install the retainer clip over the blower wheel hub.
3. Install the blower motor in the HVAC housing with three mounting screws. Tighten the mounting screws to 2.2 Nm (20 in. lbs.).
4. Plug the blower motor wire harness connector into the blower motor socket.
5. Connect the battery negative cable.
