Grand Cherokee 4WD V8-4.7L (2003)
16.
Install the headliner to the vehicle. Do not install the Intrusion Alarm Module to the ITM snap ring.
17.
While pulling down on the ITM snap ring, remove the remaining protective facing on the foam tape. Adhere the foam tape to the ITM support
bracket. The ITM snap ring should now be affixed to the new ITM support bracket.
18.
Install the Intrusion Alarm Module to the ITM snap ring.
19.
Connect the negative battery cable to the battery negative terminal.
20.
Set the clock to the correct time.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE
FAILURE CODE
