Grand Cherokee 4WD V8-4.7L (2003)
red CPA lock are fully engaged.
5. Reinstall the center console bracket onto the one or two studs on the floor panel transmission tunnel just forward of the ACM.
6. Install and tighten the nut or nuts that secure the center console bracket to the stud or studs on the floor panel transmission tunnel. Tighten the nuts
to 28 Nm (21 ft. lbs.).
7. Reinstall the center console onto the top of the floor panel transmission tunnel.
8. Do not reconnect the battery negative cable at this time. The supplemental restraint system verification test procedure should be performed
following service of any supplemental restraint system component.