Grand Cherokee 4WD V8-4.7L (2003)
15. Install new ring gear bolts and alternately tighten to 108 Nm (80 ft. lbs.) (Fig. 64).
CAUTION: Never reuse the ring gear bolts. The bolts can fracture causing extensive damage.
NOTE: If equipped with Veri-Lok differential install oil feed plenum and side bearing.
16. Install differential in housing and verify differential bearing preload, gear mesh and contact pattern. Refer to Adjustment for procedure.
17. Install differential cover and fill with gear lubricant.
18. Install propeller shaft with reference marks aligned.
19. Remove supports and lower vehicle.
