Grand Cherokee 4WD V8-4.7L (2003)
1. Apply Mopar Door Ease or equivalent lubricant to outside surface of pinion bearing cups.
2. Install rear bearing cup with Installer D-146 and Handle C-4171 and verify cup is seated (Fig. 58).
3. Install bearing cup with Installer D-130 and Handle C-4171 (Fig. 59) and verify cup is seated.
4. Install front pinion bearing, and oil slinger if equipped.
5. Apply a light coating of gear lubricant on the lip of pinion seal and install seal with Installer 8890.
