jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Cowl Trim Panel - Removal|Page 8296 > < Cowl Trim Panel - Removal|Page 8294
Page 3
background image

1. Install new latches (1) through the load floor hole (2) and seat the clips (3) fully.
2. Install the load floor, See: Load Floor - Installation.

Quarter Trim Panel - Removal

REMOVAL

1. Remove the rear passenger seat cushion, See: Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Removal.

2. Remove the rear seat back. See: Seats/Seat Back/Service and Repair/Seat Back - Removal 

Cowl Trim Panel - Removal|Page 8296 > < Cowl Trim Panel - Removal|Page 8294