Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)
Seat Heater: Service and Repair
Heater Pad - Installation
INSTALLATION
CAUTION: During the installation of the replacement heating element, be careful not to fold or crease the element assembly. Folds or creases
will cause premature failure.
1. Peel off the adhesive backing on the back of the replacement heating element (2) and stick directly where the factory installed heating element was
placed (there will be adhesive marks on the foam outlining the factory installed element)(1).
2. Install the appropriate seat cushion or seat back trim cover (1). Refer to the appropriate procedures.
