Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)
Power Distribution Module: Service and Repair
Power Inverter Module - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear seat cushion assembly, See: Body and Frame/Seats/Seat Back/Service and Repair/Seat Back - Removal.
3. Remove the fastener (1) from the inverter module mounting bracket of the (5).
4. Slide the module rearward to release the mounting tabs (3) from the slots in the seat frame (2).
5. Remove the inverter module (4).