jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Fuel Line Coupler|Description and Operation|Page 3569 > < Fuel Line Coupler|Description and Operation|Page 3567
Page 2
background image

6. Perform fuel pressure release procedure. Refer to Fuel Pressure Release Procedure.  See: Fuel Filter/Fuel Pressure Release/Service and Repair
7. Disconnect negative battery cable from battery.
8. Clean fitting of any foreign material before disassembly.
9. 2-Button Type Fitting: This type of fitting (1) is equipped with a push-button located on each side of quick-connect fitting (2). Press on both

buttons simultaneously for removal. Special tools are not required for disconnection.

10. Pinch-Type Fitting: This fitting (1) is equipped with two finger tabs (2). Pinch both tabs together while removing fitting.  Special tools are not

required for disconnection.

Fuel Line Coupler|Description and Operation|Page 3569 > < Fuel Line Coupler|Description and Operation|Page 3567