jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Steering Gear - Removal|Page 6235 > < Steering Gear - Description|Page 6232
Page 1
background image

Steering Gear: Service and Repair
Steering Gear - Removal

REMOVAL

CAUTION: Steering column module is centered to the vehicles steering system. Failure to keep the system and steering column module

centered and locked/inhibited from rotating can result in steering column module damage. See: Restraint Systems/Air Bag
Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Procedures .

1. Place the front wheels in the straight ahead position with the steering wheel centered and locked with a steering wheel lock.
2. Drain or siphon the power steering system.
3. Remove the column coupler shaft bolt (2) and remove the shaft from the gear (3).

NOTE: The power steering lines on the 8 cylinder engines are removed from below the vehicle.

4. 6 Cylinder engine only - Remove the pressure line (2), and the return line (3) at the gear (1).

Steering Gear - Removal|Page 6235 > < Steering Gear - Description|Page 6232