Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)
Steering Gear: Service and Repair
Steering Gear - Installation
INSTALLATION
CAUTION: Steering column module is centered to the vehicles steering system. Failure to keep the system and steering column module
centered and locked/inhibited from rotating can result in steering column module damage. See: Restraint Systems/Air Bag
Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Procedures .
1. Install the outer tie rod ends. (if removed).
2. Position the steering gear back into the vehicle the same way it was removed.
3. Install the steering gear mounting nuts (2) and tighten to 244 Nm (180 ft. lbs.). After tightening the nuts, re-center the steering gear (1).
