Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)
4. Install the upper ball joint retaining nut (4) and tighten the nut to 95 Nm (70 ft.lbs.).
5. Install the inner fender well (2).
6. Install the tire and wheel.
7. Remove the supports and lower the vehicle.
8. Perform a wheel alignment See: Alignment/Service and Repair.
Front Lower Control Arm - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the steering knuckle (3). See: Front Steering Knuckle/Service and Repair/Front Steering Knuckle - Removal.
