jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Torque Converter - Description|Page 4347 > < Torque Converter - Description
Page 2
background image

IMPELLER

The impeller  is an integral part of the converter housing. The impeller consists of curved blades placed radially along the inside of the housing on the
transmission side of the converter. As the converter housing is rotated by the engine, so is the impeller, because they are one and the same and are the
driving members of the system.

TURBINE

TURBINE

The turbine  is the output, or driven, member of the converter. The turbine is mounted within the housing opposite the impeller, but is not attached to the
housing. The input shaft is inserted through the center of the impeller and splined into the turbine. The design of the turbine is similar to the impeller,
except the blades of the turbine are curved in the opposite direction. 

STATOR

Torque Converter - Description|Page 4347 > < Torque Converter - Description