Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)
Wheel Bearing: Service and Repair
Front Hub and Bearing - Installation
INSTALLATION
1. Install the hub bearing (3) to the knuckle then tighten the 3 bolts to 115 Nm (85 ft. lbs.).
2. Install the wheel speed sensor (1) into the hub (3) and then install the mounting bolt (2) and tighten to 12-14 Nm (106-124 in. lbs.). See: Brakes
and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Wheel Speed Sensor -
Installation/Front.
3. Install the brake rotor (1) See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Installation.
