jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Four Wheel Drive Indicator Lamp > < NV140 Transfer Case|Page 4751
Page 1
background image

Fluid - Transfer Case: Service and Repair
NV245 Transfer Case

FLUID DRAIN/REFILL

The fill and drain plugs are both in the rear case.

1. Raise vehicle. Ensure that the vehicle is level on the hoist.
2. Position drain pan under transfer case.
3. Remove drain and fill plugs and drain lubricant completely.
4. Install drain plug. Tighten plug to 20-34 Nm (15-25 ft. lbs.).
5. Remove drain pan.
6. Fill transfer case to bottom edge of fill plug opening with the required fluid.   
7. Install and tighten fill plug to 20-34 Nm (15-25 ft. lbs.).
8. Lower vehicle.

Four Wheel Drive Indicator Lamp > < NV140 Transfer Case|Page 4751