jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Transmission Temperature Sensor/Switch, A/T > < Input Speed Sensor - Removal|Page 4991

Grand Cherokee 4WD V8-4.7L Flex Fuel (2009)

Page 1
background image

Transmission Speed Sensor: Service and Repair
Output Speed Sensor - Installation

INSTALLATION

1. Install the output speed sensor (1) into the transmission case.
2. Install the bolt to hold the output speed sensor (1) into the transmission case. Tighten the bolt to 12 Nm (105 in.lbs.).
3. Install the wiring connector onto the output speed sensor (1).
4. Verify the transmission fluid level. Add fluid as necessary.
5. Lower vehicle.

Transmission Temperature Sensor/Switch, A/T > < Input Speed Sensor - Removal|Page 4991