Grand Cherokee 4WD V8-4.7L VIN N (2000)
Rear Door Window Regulator: Procedures
REMOVAL
1. Remove door trim panel and waterdam. Disconnect the speaker harness and power window harness, if equipped. If necessary, refer to removal
procedure.
2. Lower window glass.
3. Pull run weatherstrip from fixed glass.
4. Remove fasteners retaining fixed glass module.
5. Remove the fixed glass module.
6. Raise the door glass and support.
Window Regulator Retainer Clips
7. Remove the window clips retaining regulator.
8. Remove the door glass.
Rear Door Window Regulator
9. Remove the fasteners retaining the regulator.
INSTALLATION
1. Position the window regulator in the door.
2. Install the fasteners retaining the regulator.
3. Install the door glass.
