Grand Cherokee 4WD V8-4.7L VIN N (2000)
Hood Latch Release Cable: Service and Repair
LATCH RELEASE CABLE
REMOVAL
Fig. 3
1. Disconnect cable from hood latch (Fig. 3).
2. Disconnect cable from retaining clips on left inner fender panel.
3. Remove left cowl side trim panel.
Fig. 4
4. Remove fasteners attaching cable bracket to cowl side panel (Fig. 4).
5. Route cable through dash panel and remove it from under instrument panel.
INSTALLATION
1. Route cable through hole in dash panel into engine compartment.
2. Pull cable forward and seat grommet in dash panel.
