Grand Cherokee 4WD V8-4.7L VIN N (2000)
Trunk / Liftgate Latch: Service and Repair
Latch - Cables
LATCH - CABLES
REMOVAL
1. Remove the latch.
Fig. 12
2. Open the cable plastic retention clip. (Fig. 12)
3. Separate the cable from the control assembly. (Fig. 12)
4. Release the support clips, if equipped, and remove the cable.
INSTALLATION
1. Install the cable and attach it to the latch.
2. Connect the cable to the control assembly and secure the retainer clips.
3. Attach the support clips if equipped.
4. Install the latch.
5. Adjust the cables.
