Grand Cherokee 4WD V8-4.7L VIN N (2000)
Piston Dust Boot Removal
8. Remove piston dust boots with a suitable pry tool and discard.
Piston Seal
9. Remove piston seals from caliper and discard.
CAUTION: Do not scratch piston bore while removing the seals.
Caliper Slide Pin Bushings
10. Remove caliper slide pin bushings.
11. Remove caliper bleed screw.
ASSEMBLY
CAUTION: Dirt, oil, and solvents can damage caliper seals. Insure assembly area is clean and dry.
1. Lubricate caliper pistons, piston seals and piston bores with clean brake fluid.
