Grand Cherokee 4WD V8-4.7L VIN N (2000)
Driver/Vehicle Information Display: Service and Repair
Electronic Vehicle Information Center Programming
EVIC PROGRAMMING MODE
The Electronic Vehicle Information Center (EVIC) provides the vehicle operator with a user interface, which allows the selection of several optional
customer programmable electronic features to suit individual preferences. The EVIC must be placed into its programming mode in order to view or
change the programmable features. To enter the EVIC programming mode and to view or change the selected programmable features options, proceed
as follows:
1. Turn the ignition switch to the ON position.
2. Depress and release the MENU push button. The first item in the programmable features menu list will appear in the EVIC display.
3. Momentarily depress and release the MENU push button to step through the programmable features list. Each programmable feature and its
currently selected option will appear on the EVIC display in the sequence shown in the Programmable Features list that follows.
4. Momentarily depress and release the STEP push button to step through the available options for the programmable feature being displayed.
5. The option that last appears in the display with a programmable feature before exiting the programming mode, becomes the newly selected
programmable feature option.
6. The EVIC exits the programming mode and returns to its normal operating mode when the C/T push button is depressed or when the end of the
programmable features menu list is reached, whichever occurs first.
PROGRAMMABLE FEATURES
-
LANGUAGE? - The options include English, Francaise, Deutsch, Italiana, or Espanol. The default is English. All EVIC display nomenclature,
including the trip computer functions, warning messages and the programmable features appear in the selected language.
-
DISPLAY U. S. OR METRIC? - The options include U. S. and M. The default is U. S. This feature toggles the trip computer temperature, fuel
economy and odometer display readings between U. S. and metric units of measure. It also changes the odometer display in the instrument cluster.
-
AUTO DOOR LOCKS? - The options include Yes and No. The default is Yes. when Yes is selected, all doors and the liftgate lock automatically
when vehicle speed reaches 25 kilometers-per-hour (15 miles-per-hour). If YES is selected, a second programmable feature appears, AUTO
UNLOCK ON EXIT? - The options again include Yes and No. The default is No. When Yes is selected, following each Auto Door Lock event all
doors and the liftgate will automatically unlock when the driver door is opened, if the vehicle is stopped and the transmission gear selector is in
Park or Neutral. The Auto Door Unlock event will only occur once following each Auto Door Lock event.
-
REMOTE UNLOCK - The options include Driver Door 1st and All Doors. The default is Driver Door 1st. When Diver Door 1st is selected, only
the driver door unlocks when the Unlock button of the Remote Keyless Entry RKE. transmitter is depressed once. The Unlock button of the RKE
transmitter must be depressed twice to unlock all doors and the liftgate. When All Doors is selected, all doors and the liftgate unlock when the
Unlock button of the RKE transmitter is depressed once.
-
REMOTE LINKED TO MEMORY? - This programmable feature only applies to vehicles equipped with the optional memory system. The
options include Yes and No. The default is No. When Yes is selected, the memory system will recall the Driver 1 or Driver 2 memory settings
assigned to the RKE transmitter being used to unlock the vehicle. When No is selected, the memory system will only recall memory settings when
the Driver 1 or Driver 2 push buttons of the memory switch on the driver side front door trim panel are depressed.
-
SOUND HORN ON LOCK? - The options include Yes and No. The default is No. When Yes is selected, a short horn chirp will provide an
audible confirmation when the RKE receiver recognizes a valid Lock signal from an RKE transmitter. When No is selected, no horn chirp will
occur with the RKE Lock event. This feature may be selected independent of the FLASH LIGHTS WITH LOCKS? programmable feature.
-
FLASH LIGHTS WITH LOCKS? - The options include Yes and No. The default is Yes. When Yes is selected, a single flash of the hazard
warning lamps will provide an optical confirmation when the RKE receiver recognizes a valid Lock signal from an RKE transmitter, and two
flashes of the same lamps will occur when the RKE receiver recognizes a valid Unlock signal from an RKE transmitter. When No is selected, no
lamp flash will occur with the RKE Lock or Unlock event. This feature may be selected independent of the SOUND HORN ON LOCK?
programmable feature.
-
HEADLAMP DELAY = - The options include OFF, 30 Sec, 60 Sec, and 90 Sec. The default is 90 Sec. When a time interval is selected, the
headlamps will remain on for that length of time when the headlamps are turned off after the ignition is turned off, or if the Auto mode is selected
on vehicles with the Auto Headlamps option. When OFF is selected, the headlamp delay feature is disabled.
-
HEADLAMPS ON WITH WIPERS? - This programmable feature only applies to vehicles equipped with the optional Auto Headlamps. The
options include Yes and No. The default is Yes. When Yes is selected, the headlamps will turn on automatically when the windshield wipers are
turned on. The headlamps will turn off when the wipers are turned off, as long as the headlamp switch is in the Auto or Off positions. When No is
selected, the headlamps will only turn on if manually selected or if the Auto mode is selected and the outside ambient light levels dictate that they
should be on.
-
SERVICE INTERVAL - The options include from 1000 to 12000 kilometers in 1000 kilometer increments 2000 to 7500 miles in 500 mile
