Grand Cherokee 4WD V8-4.7L VIN N (2000)
Hazard Warning Flasher: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
1. Disconnect.
2. Remove the steering column opening cover from the instrument panel.
Combination Flasher
3. Remove the combination flasher from the junction block.
INSTALLATION
1. Position the combination flasher in the proper receptacle in the junction block.
2. Align the combination flasher terminals with the terminal cavities in the junction block receptacle.
3. Push in firmly on the combination flasher until the terminals are fully seated in the terminal cavities in the junction block receptacle.
4. Install the steering column opening cover onto the instrument panel.
5. Reconnect the battery negative cable.
