Grand Cherokee 4WD V8-4.7L VIN N (2000)
5. Remove the two screws that secure the left multi-function switch to the multi-function switch mounting housing.
6. Remove the left multi-function switch from the multi-function switch mounting housing.
INSTALLATION
1. Position the left multi-function switch onto the multi-function switch mounting housing.
2. Install and tighten the two screws that secure the left multi-function switch to the multi-function switch mounting housing. Tighten the screws to
2.5 Nm (22 in. lbs.).
3. Reconnect the instrument panel wire harness connector to the left multi-function switch connector receptacle.
4. Position the lower tilting steering column shroud to the underside of the steering column.
5. Install and tighten the screw that secures the lower tilting steering column shroud to the multi- function switch mounting housing. Tighten the
screw to 1.9 Nm (17 in. lbs.).
6. Position the upper tilting column shroud over the steering column with the hazard warning switch button inserted through the hole in the upper
surface of the shroud. Align the upper tilting steering column shroud to the lower shroud and snap the two shroud halves together.
7. Reconnect the battery negative cable.
