jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Component Description|Page 3285 > < Component Description|Page 3283
Page 9
background image

features for possible programming/reprogramming. Pressing the C/T (compass-temperature display selector) button returns the display to the
normal (compass-temperature display) mode. When the sequence is complete, the display also returns to the normal mode. Features that are
dependent on vehicle equipment; such as REMOTE LINKED TO MEMORY EASY EXIT, only appear if applicable.

-

Customer Programmable Features:
-

LANGUAGE?
The driver may select English, Francaise, Deutsch, Italiana, Espanol. The word Language is always in English regardless of which
language is selected. All other display nomenclature, including the compass-temperature and trip computer functions, appears in the
selected language.

-

DISPLAY US OR METRIC?
Toggles the trip computer temperature, fuel economy, and odometer display readings between the two sets of units. It also changes the
odometer display in the instrument cluster.

-

AUTO DOOR LOCKS?
When this feature is selected, all doors and the liftgate lock automatically when vehicle speed reaches 15 mph (25 kph). Previously this
feature could be programmed only by a dealer.

-

AUTO UNLOCK ON EXIT?
When automatic locking is chosen, automatic unlocking may also be selected. When selected, all doors will unlock when the driver's door
is open if the vehicle is stopped and the transmission is in Park or Neutral. Grand Cherokee is the first Chrysler vehicle to offer this feature.

-

REMOTE UNLOCK?
The driver may choose to have all doors and the liftgate unlock at the first press of the unlock button, or unlock only the driver's door on
the first press and require a second press to unlock all doors and the liftgate.

-

REMOTE LINKED TO MEMORY?
When chosen, the Jeep Memory System will select memorized seat, mirror and radio settings when an RKE (remote keyless entry)
transmitter unlock button is pressed. If not chosen, selection of memorized settings may still be done using the memory buttons. Grand
Cherokee is the first Chrysler vehicle to offer selection of memory features using the RKE transmitter.

-

SOUND HORN ON LOCK?
When selected, a short horn pulse will occur when the RKE lock button is pressed. This feature may be selected with or without FLASH
LAMP ON LOCK/UNLOCK? Vehicles built in Graz do not have this feature as it is not allowed in Europe.

-

FLASH LAMP ON LOCK/UNLOCK?
If enabled, front and rear turn signal lamps will flash once when the doors are locked, and four times when the doors are unlocked using the
RKE transmitter. This feature may be selected with or without SOUND HORN ON LOCK?

-

HEAD LAMP DELAY
The driver may choose to have the head lamps remain ON, when leaving the vehicle, for 30 seconds60 seconds90 seconds or not at all.

-

HEAD LAMPS ON WITH WIPERS?
On vehicles with automatic head lamps, the driver may choose to have the head lamps turn ON simultaneously with the windshield wipers.
If the head lamps were turned ON in this way, they will also turn OFF with the wipers. Previously, this action occurred automatically on
vehicles equipped with automatic head lamps.

-

SERVICE INTERVAL
This feature selects an interval from 2000 to 7500 miles (3,200 to 12,000 kilometers) in 500 mile (800 kilometer) increments between
PERFORM SERVICE alert messages. When service has been performed, the counter is reset by pressing and holding the RESET button
for 3 seconds as before.

-

RESET SERVICE DISTANCE?
If SERVICE INTERVAL is changed, this message asks if the accumulated service distance should be reset to 0 because the service was
performed.

-

LOW FUEL CHIME?
If enabled, a single chime will sound as an added reminder when the instrument cluster low fuel icon illuminates. The chime will sound
once per ignition cycle.

-

EASY EXIT SEAT?
If enabled, the driver's seat moves rearward two inches (55 mm) (or to the farthest rearward position, if this is less) when the key is
removed from the ignition switch to facilitate driver exit from the vehicle. If the REMOTE LINKED TO MEMORY feature is enabled, the
seat will return to the memorized position when the RKE unlock button is pressed.

Memory Messages

Component Description|Page 3285 > < Component Description|Page 3283