Grand Cherokee 4WD V8-4.7L VIN N (2000)
Caution: Ensure the spring is positioned on the lower isolator with the end of the spring coil against the isolator spring locator.
4. Raise the axle and guide the springs onto the spring upper mounts and lower shock studs into the axle brackets.
5. Install the shock absorbers lower mounting nuts.
6. Install the stabilizer bar link to the axle bracket and install the mounting bolts and nuts.
7. Install the track bar to the axle bracket and install the mounting bolt.
Note: It may be necessary to pry the axle assembly over to install the track bar bolt.
8. Tighten all suspension components to proper torque.
9. Install the wheel and tire assemblies.
10. Remove support and lower vehicle.
