Grand Cherokee 4WD V8-4.7L VIN N (2000)
Fig. 50
12. Remove the rear bearing from the pinion with Puller/Press C-293-PA and Adapters C-293-42 (Fig. 50). Place 4 adapter blocks so they do not
damage the bearing cage.
13. Remove the pinion depth shims from the pinion gear shaft. Record the total thickness of the depth shims.
INSTALLATION
Fig. 51
1. Apply Mopar Dry Film Lubricant to outside surface of bearing cup. Install the pinion rear bearing cup with Installer C-4308 and Driver Handle
C-4171 (Fig. 51). Ensure cup is correctly seated.