Grand Cherokee 4WD V8-4.7L VIN N (2000)
Fig. 28
3. Install retaining plate on axle (Fig. 28).
4. Apply a coat of multipurpose grease on sealing surface of axle seal.
5. Install seal on axle with cavity away from retaining plate (Fig. 28).
6. Lubricate bearing with Mopar Wheel Bearing Grease, or equivalent. Wipe excess grease from the bearing.
7. Slide bearing onto axle shaft (Fig. 28).
Fig. 29
8. Using Installer 7913 and shop press, press bearing onto axle shaft (Fig. 29).
