Grand Cherokee 4WD V8-5.2L VIN Y (1998)
21.
Install the guide tube bracket and spring stop using the screws removed previously. Tighten the screws to 3 Nm (27 in. Lbs.).
22.
Install the tie straps.
23.
Repeat the procedure for the other cable guide bracket.
24.
Position the sun roof glass in the full open position.
25.
Insert the drive cables into the motor drive gear.
26.
Position the tube bracket over the gear and attach the bracket using the rivets provided in the kit.
27.
Install the sun roof assembly into position. Make the necessary electrical connections and cycle the unit to assure correct operation.
28.
Connect the drain tubes to the tray.
29.
Install the head liner and related components by reversing the removal procedure. Use care not to damage the head liner. Use care not to trap or
pinch any wires when installing the sun visor or overhead console/dome lamp.
