Grand Cherokee 4WD V8-5.2L VIN Y (1998)
^
four wheel speed sensors
^
stop lamp switch
^
ignition switch
^
battery voltage
^
diagnostic communication ISO/K
^
G switch (acceleration switch)
The CAB outputs include the following:
^
six valve/solenoid drivers
^
pump/motor actuation
^
ABS warning lamp actuation
^
diagnostic communication
Faults are stored in a diagnostic program memory and are accessible with the DRB scan tool.
ABS faults remain in memory until cleared. or until after the vehicle is started approximately 50 times. Stored faults are not erased if the battery is
disconnected.
