Grand Cherokee 4WD V8-5.2L VIN Y (1998)
4. Adjust the right wheel toe position with the drag link. Turn the sleeve until the right wheel is at the preferred positive TOE-IN specification.
Position the clamp bolts as shown and tighten to 49 Nm (36 ft. lbs.).
NOTE: Tighten clamp bolt nearest the pitman arm first. Make sure the toe setting does not change during clamp tightening.
5. Adjust the left wheel toe position with the tie rod. Turn the sleeve until the left wheel is at the preferred positive TOE-IN specification and the
TOE DIFFERENTIAL is within 0.05°. Position the clamp bolts as shown and tighten to 49 Nm (36 ft. lbs.).
NOTE: Tighten the clamp bolt furthest from the wheel first. Make sure the toe setting does not change during clamp tightening.
6. Verify alignment specifications, then turn the engine off.
