Grand Cherokee 4WD V8-5.2L VIN Y (1998)
Overdrive Assembly: Service and Repair
Overdrive Housing Bushing
REMOVAL
1. Remove overdrive housing yoke seal.
Bushing Removal - Typical
2. Insert Remover 6957 into overdrive housing. Tighten tool to bushing and remove bushing.
INSTALLATION
1. Align bushing oil hole with oil slot in overdrive housing.
2. Tap bushing into place with Installer 6951 and Handle C-4171.
Overdrive Housing Seal Installation
3. Install new oil seal in housing using Seal Installer C-3995-A.
