jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Headliner - Removal|Page 10933 > < Headliner - Removal|Page 10931
Page 1
background image

Headliner: Service and Repair
Headliner - Installation

INSTALLATION

CAUTION: Be careful not to crease the headliner.

1. Position the headliner in the vehicle through the liftgate door opening.
2. Connect the headliner wire harness connector located at the left D-pillar.
3. Connect the rear washer hose.
4. Raise the rear of the headliner upward.
5. Raise the front of the headliner upward and install the sun visor supports, See: Sun Visor/Service and Repair/Sun Visor Support - Installation.

6. Install the sun visors, See: Sun Visor/Service and Repair/Sun Visor - Installation.

7. Install the overhead console, See: Console/Service and Repair/Overhead Console - Installation.
8. If equipped, connect the headliner wire harness connector(s) to the inside rear view mirror.
9. If equipped, connect the headliner wire harness connector to the rain sensor.

10. Connect the headliner wire harness connector located at the left A-pillar.
11. Install the grab handle above each rear passenger door, See: Passenger Assist Handle/Service and Repair/Handle-Roof Grab/Installation.

Headliner - Removal|Page 10933 > < Headliner - Removal|Page 10931