Grand Cherokee 4WD V8-5.7L (2008)
Door Lock Cylinder: Service and Repair
Installation
INSTALLATION
1. Insert the lock cylinder (2) into the cavity on the back of the driver side exterior door handle (1).
2. Apply hand pressure to the back of the cylinder to make sure it is fully seated in the handle.
3. Align the lock cylinder in the handle by aligning the two screw holes on the lock cylinder housing with the mounting holes of the door handle.
4. Install the exterior door handle (1) onto the outside of the driver side front door See: Doors, Hood and Trunk/Doors/Front Door/Front Door
Handle/Front Door Exterior Handle/Service and Repair/Front Door Exterior Handle - Installation.
