Grand Cherokee 4WD V8-5.7L (2008)
INSTALLATION
EXHAUST MANIFOLD
1. Install manifold gasket and manifold.
2. Install manifold bolts and tighten to 25 Nm (18 ft. lbs.).
3. Install heat shield and tighten nuts to 8 Nm (70 in. lbs.).
4. Install engine mounts. See: Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service and Repair/Engine Mount -
Installation/Front Engine Mount
5. Lower engine.
CAUTION: Do not damage engine harness while lowering the engine.
6. Install and tighten right and left side engine mount to frame fastenersSee: Engine/Drive Belts, Mounts, Brackets and Accessories/Engine
Mount/Service and Repair/Engine Mount - Installation/Front Engine Mount.
7. Install exhaust flange to pipe bolts.
8. Lower vehicle.
9. Connect negative battery cable.
