jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Driver/Vehicle Information Display|Description|Page 11951 > < Driver/Vehicle Information Display|Description|Page 11949
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
Operation

OPERATION

The Electronic Vehicle Information Center (EVIC) uses both non-switched and ignition switched sources of battery current so that some of its features
remain operational at any time, while others may only operate with the ignition switch in the "ON" position. When the ignition switch is turned to the
"ON" position, the EVIC display will return to the last function being displayed before the ignition was turned to the "OFF" position.

The EVIC system is comprised of several different components that communicate over the Controller Area Network (CAN) and Local Interface Network
(LIN) Data Buses. If the system is inoperative a scan tool and the appropriate diagnostic information must be used to diagnose the system. 

The EVIC function buttons are used to operate the different functions of the EVIC system. Pressing and releasing the MENU  button (1) allows the
driver to select the Compass/Temperature, Trip Computer, Personal Settings or System Status functions. The STEP  button (4) is used to toggle through
options or features of the Trip Computer, Personal Settings or System Status functions. Pressing and releasing the RESET  button (3) allows the
selection of setting or resetting of the function currently displayed at that time. Pressing and releasing the C/T  (compass/temperature) button (2) will
cause the EVIC to return to the compass/temperature display mode from any other mode.

EVIC DISPLAY MODES

SYSTEM STATUS MODE

Displays warnings and user interaction messages. Initial warnings will be displayed accompanied by a series of audible beeps. Critical text warnings will
be displayed until the failure is corrected. Non-critical text warnings will be displayed for 60 seconds. The driver can scroll to view multiple messages by
using the STEP button.

When the appropriate conditions exist, the EVIC displays the following messages:

-

TURN SIGNAL ON

-

PERFORM SERVICE

-

KEY NOT PROGRAMMED - DAMAGED KEY

-

KEY NOT PROGRAMMED - INVALID KEY

-

KEY NOT PROGRAMMED - EXCEEDED KEY PROGRAM LIMIT

-

PROGRAMMING ACTIVE - NEW KEY PROGRAMMED

-

SERVICE SECURITY KEY

-

INVALID KEY - TRY ALTERNATE KEY

-

DRIVER/PASSENGER DOOR OPEN (with graphic)

-

LEFT/RIGHT REAR DOOR OPEN (with graphic)

-

X DOORS OPEN (with graphic)

-

LIFTGATE OPEN (with graphic)

-

LIFTGATE/DOOR OPEN (with graphic)

-

LIFTGATE/DOORS OPEN (with graphic)

-

LIFTGLASS OPEN (with graphic)

-

HOOD OPEN (with graphic)

-

HOOD/DOOR OPEN (with graphic)

-

HOOD/DOORS OPEN (with graphic)

-

LIFTGATE/HOOD OPEN (with graphic)

-

HOOD/GLASS/DOOR OPEN (with graphic)

-

HOOD/GLASS/DOORS OPEN (with graphic)

Driver/Vehicle Information Display|Description|Page 11951 > < Driver/Vehicle Information Display|Description|Page 11949