Grand Cherokee 4WD V8-5.7L (2008)
life will result.
1. Align the low beam (2) or high beam (1) bulb base with the keyed opening on the back of the reflector.
2. Insert the bulb and base into the reflector until the base is firmly seated.
3. Rotate the base clockwise about 30 degrees to lock it into place.
4. Reconnect the pigtail wire connector to the connector receptacle integral to the bulb base on the back of the front lamp unit housing (5).
5. If equipped, reinstall the front lamp unit cover over the top of the lamp. See: Service and Repair/Removal and Replacement/Front Lamp Unit -
Installation.
6. Reconnect the battery negative cable.
