jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Reading Lamp Bulb - Removal|Page 12459 > < Reading Lamp Bulb - Removal
Page 2
background image

6. Carefully unsnap the bulb (2) from the two bulb holders (1) within the lamp housing.
7. Remove the bulb from the lamp.

Bulb - Rear

BULB - REAR

NOTE: The rear reading lamps are integral to the grab handle in the headliner on the inner roof side rail over each outboard rear seating
position.

1. Disconnect and isolate the battery negative cable.
2. Using a small thin-bladed screwdriver, gently pry the upper corner at the forward end (2) of the reading lamp lens (1) away from the grab handle

far enough to unsnap it from the lamp housing.

3. Pull the front end of the lens outward far enough to disengage the larger rear lens tab from the lamp housing.

Reading Lamp Bulb - Removal|Page 12459 > < Reading Lamp Bulb - Removal