Grand Cherokee 4WD V8-5.7L (2008)
1. Align the base of the bulb with the park/turn signal bulb socket (4).
2. Push the bulb straight into the socket until the base is firmly seated.
3. Align the socket and bulb with the keyed opening on the back of the front lamp unit housing (5).
4. Insert the socket and bulb into the housing until the socket is firmly seated.
5. Rotate the socket clockwise about 30 degrees to lock it into place.
6. If equipped, reinstall the front lamp unit cover over the top of the lamp. See: Service and Repair/Removal and Replacement/Front Lamp Unit -
Installation.
7. Reconnect the battery negative cable.
