jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

A/C Line - Removal|Page 1959 > < A/C Line - Removal
Page 2
background image

WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation See: Heating and Air
Conditioning/Service Precautions/Warning and See: Heating and Air Conditioning/Service Precautions/Caution. Failure to follow the warnings
and cautions could result in possible personal injury or death.

NOTE: LHD model with 5.7L engine shown. RHD model and other engines similar.

1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system See: Heating and Air Conditioning/Service and Repair/Refrigerant System Recovery.
3. Remove the air cleaner housing, air intake tube and the resonator (if equipped)  .
4. Remove the nut (3) that secures the A/C suction line (2) and the A/C liquid line (10) to the A/C expansion valve (1).
5. Disconnect the A/C suction line from the A/C expansion valve and remove and discard the O-ring seal.

6. Remove the nut (1) that secures the A/C liquid line (2) to the A/C receiver/drier (3).
7. Disconnect the A/C liquid line from the A/C receiver/drier and remove and discard the dual-plane seal.

A/C Line - Removal|Page 1959 > < A/C Line - Removal