Grand Cherokee 4WD V8-5.7L (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Hoses - Installation
Pressure Line - Pump To HEC Fan
PRESSURE LINE - PUMP TO HEC FAN
1. Install the line (2) to the vehicle.
2. Reconnect the power steering pressure line (2) to the power steering gear (1) Tighten to 28 Nm (21 ft.lbs.).
3. Install the oil drip tray (1) and tighten the 3 bolts (2).
4. Install the front splash shield.
5. Lower the vehicle.
6. Reconnect the power steering pressure line to the power steering pump Tighten to 28 Nm (21 ft.lbs.).
7. Install the air cleaner assembly.
8. Refill the power steering fluid and bleed the system See: Power Steering Bleeding/Service and Repair.
Supply Hose - Pump To Reservoir
SUPPLY HOSE - PUMP TO RESERVOIR
