Grand Cherokee 4WD V8-5.7L (2008)
then press the two pieces together until both latch features of the mounting cup are fully engaged with the mounting flange of the nozzle.
5. Remove the clamp from the washer supply hose.
6. Install and tighten the two screws (2) that secure the mounting cup to the nozzle mounting flange. Tighten the screws securely.
7. Pull the telescopic nozzle out to its fully extended position.
8. With the nozzle extended, Engage the latch features on each side of the headlamp washer nozzle cover to the sides of the nozzle, then release the
nozzle back to its retracted position.
