Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
A resilient 0-ring spacer around the circumference of the membrane isolates the membrane from the openings in the fascia or the fascia molding. Each
sensor is snapped into its own dedicated molded plastic mounting bracket. Each rear mounting bracket has integral mounting tabs that snap into openings
in the horizontal tabs of the molding that extend through slots to the back side of the rear fascia. The front mounting brackets are heat-staked to the back
side of the front fascia.
The park assist sensors cannot be adjusted or repaired. If ineffective or damaged they must be replaced. The sensors the spacers and the four rear sensor
mounting brackets are each available for individual service replacement.
