Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
9. Install the front door sill scuff plate.
Removal
REMOVAL
1. Remove the trim plug (1) from the upper b-pillar trim (2).
CAUTION: The upper trim plug must be removed and discarded to gain access to the upper retaining screw before attempting to remove the
trim panel. Failure to remove the trim screw may result in damage to the trim panel or the retaining clip.
2. Using a small drill (2) approximately 3 mm (7/64"), drill a hole into the trim plug (1).
3. Using a hook type tool (1) or equivalent, remove and discard the trim plug (2).
