Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
WARNING: A seat structure that has seen significant load may have the locking mechanism activated and may exhibit the following
symptoms:
-
Locking pawl (2) loose
-
Locking pawl (2) engaged into the seat frame sidemember (1)
-
Height adjuster only works on outboard side
-
Broken or missing shear pin (3)
If any one or more of these symptoms exist replace the height adjuster assembly. Do not attempt any repairs. Failure to follow these instructions may
result in personal injury or death.
FRONT TILT MOTOR
1. Position motor (1) on seat adjuster (2).
2. Install the fasteners (1) holding the motor to the seat adjuster (2). Tighten the screws to 5 Nm (44 in. lbs.).
