Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
10. Install the screws (1) that secure the blend door actuator (2) to the right side of the air distribution housing (3). Tighten the screws to 2 Nm (17 in.
lbs.).
11. Connect the HVAC wire harness connector (4) to the blend door actuator.
12. On LHD models, install the glove box into the instrument panel.
13. On RHD models, install the instrument panel silencer onto the driver side of the instrument panel.
14. Reconnect the negative battery cable.
