jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Control Assembly, HVAC > < Condenser HVAC|Removal|Page 9731
Page 2
background image

6. Remove the tape or plugs from the automatic transmission cooler line fittings and the fluid cooler ports.

7. Connect the automatic transmission cooler lines (1) to the transmission fluid cooler (2).

8. Install the power steering fluid cooler.

9. If equipped with the 3.0L diesel engine. install the charge air cooler.

10. Install the upper radiator crossmember and support bracket.

11. Install the air filter housing and air inlet tube.

12. Install the grille.

13. Reconnect the negative battery cable.

14. Evacuate the refrigerant system.

15. If the A/C condenser is being replaced, add 30 milliliters (1 fluid ounce) of refrigerant oil to the refrigerant system. When replacing multiple A/C

system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant system. Use only
refrigerant oil of the type recommended for the A/C compressor in the vehicle.

16. Charge the refrigerant system.

17. Check the automatic transmission fluid level.

Control Assembly, HVAC > < Condenser HVAC|Removal|Page 9731